KnifeKits.com : 1/4" Press-fit Button Head Pivot (.482 3-Slot Head)

1/4" Press-fit Button Head Pivot (.482 3-Slot Head)
With DDR exclusive "Lube Groove" system

Our splined, serrated press-fit 1/4" button head style pivot is designed with the new "Lube Groove" system for the ultimate performance in folder pivot design. This will help you with two processes that will make your knife building much easier, with better operation.

1) This pivot design will press into your side plate of the knife bolster, liner or frame. The press-fit will stop the pivot from spinning when you tighten it up with the screw from the opposite side. Because it is press-fit, it will stop the pivot from loosening after the pivot is tightened.

2) The "Lube Groove" is specifically designed to improve the flow and retention of lubricants, further improving the action and performance of your blade/pivot system.

Our press-fit serrated spine pivot with "Lube Groove" system is perfect for folding knives, folding tools and Butterfly knives (balisongs). Our press-fit pivot system is one of the very best designs on the market today.

Specifications:
Steel = 400 series Stainless / Heat-Treated
Head Dia. = .481"-.483"
Barrel Dia. = .249" - .250" PLEASE TEST YOUR REAMER FOR FIT BEFORE USING!
Barrel Length = .491" - .492"
Press fit spine = .07" long (approximate)
Thread Size = 8-32

1 unit = (1) 250PF3S

All KnifeKits.com pivots are heat treated for low wear.
Head Design, Press-fit Spline and "Lube Groove" system designed by Darrel Ralph. Proudly made at CKK Industries, Inc. in the USA.

250PF3S_1	1/4" Press-fit Button Head Pivot (.482 3-Slot Head) Package of 1	$ 4.40/ea
250PF3S_10	1/4" Press-fit Button Head Pivot (.482 3-Slot Head) Package of 10	39.95/10
250PF3S_25	1/4" Press-fit Button Head Pivot (.482 3-Slot Head) Package of 25	82.75/25

Select Items Below

View Order | Check Out