This is a Corby Bolt Fastener & step drill combo kit. It features 10 Corby Bolt Fasteners in the material and size specified below with the corresponding precision step drill for installation.

Corby Bolts are used for knife handle fasteners. With this design, you will create a step hole in your handle material that is slightly larger than the shank of the fastener. The two-part assembly allows for you to pass the shank precisely through your knife tang hole and handle material, allowing the larger radius of the Corby Bolt heads to create a pinch point on both sides of the handle material where it can then be tightened down to a secure hold. Once the bolt has been tightened, it can be sanded to a flush finish with the handle surface. This will result in a smooth, pin-like visual effect on the final knife handle. When used with epoxy and/or thread-locker adhesive, they will create a permanent handle bond.

Specifications
Corby Bolt Fastener
Head Diameter = .312 in. (ea.)
Head Length = .300 in. (ea.)
Shank Diameter = .213 in.
Shank Length = .350 in.
Overall Length (min) = (1.25 in)
Overall Length (max) = (1.40 in)
Thread = US 8-32
Driver = Slot
Material = Brass

Step Drill
Designed for: Handle Fasteners
Bit Dimensions = (0.312 step x 0.213 pilot) Inch
Material = HSS - High-Speed Steel

Sold As: (10) Threaded Posts  + (10) Threaded Heads + (1) Step Drill

 
 
 

Manufacturer: CKK Industries

 
Manufacturers
Quick Find

 Photo Gallery #1
 Photo Gallery #2
 --------------
 Knife Terminology
 General Knife Safety
 Basic Knife History
 Kit Instructions
 Knowledge Base

Sales/Support
+1.877.255.6433

Price Match Guarantee...click for details
    0 items
Customer Login

Log in to your Account

 
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Join the KnifeKits.com news! Click here...