Molding Preparation | Thermoform Templates
This is our Mounting Preparation category. Mounting Templates allow for the thermoform sheets to be modified to allow for attachments to fit holsters or sheaths. These templates fits our more popular attachments. The mounting templates also allow for the holsters to be built for adjustable retention. Use these mounting templates to optimize your next holster or sheath.
Molding Preparation - Retention Plate - 1911 - Full Size - (No Rail)
This is a retention plate for thermoform holster making. It is 0.187 inch in thickness and allows the maker to create retention/clearance for holster molding.…
- Model
- DM-MP-RETPLT-1911-FULL-NR-1
Molding Preparation - Retention Plate - Beretta - 92/96 - Full Size
This is a retention plate for thermoform holster making. It is 0.187 inch in thickness and allows the maker to create retention/clearance for holster molding.…
- Model
- DM-MP-RETPLT-BER-9296-F-1
Molding Preparation - Retention Plate - FNX - 45
This is a retention plate for thermoform holster making. It is 0.250 inch in thickness and allows the maker to create retention/clearance for holster molding.…
- Model
- DM-MP-RETPLT-FNX-45-1
Molding Preparation - Retention Plate - for Glock - 17
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the maker to create retention/clearance for holster molding.…
- Model
- DM-MP-RETPLT-GLOCK-17-1
Molding Preparation - Retention Plate - for Glock - 19
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the maker to create retention/clearance for holster molding.…
- Model
- DM-MP-RETPLT-GLOCK-19-1
Molding Preparation - Retention Plate - for Glock 43
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the maker to create retention/clearance for holster molding.…
- Model
- DM-MP-RETPLT-GLOCK-43-1
Molding Preparation - Retention Plate - for M&P Shield 9/40
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the maker to create retention/clearance for holster molding.…
- Model
- DM-MP-RETPLT-SHIELD940-1
Molding Preparation - Retention Plate - Sig Sauer - P320 - (Compact)
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the maker to create retention/clearance for holster molding.…
- Model
- DM-MP-RETPLT-P320-C-1
Molding Preparation - Retention Plate - Springfield - XD MOD II - (3in)
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the maker to create retention/clearance for holster molding.…
- Model
- DM-MP-RETPLT-XDM2-3-1
Molding Preparation - Retention Plates - Split Mold - for Glock - 17
These are split-mold retention plates for thermoform holster making. They allow the maker to create retention/clearance for holster molding in a vacuum press. This jig…
- Model
- DM-MP-RETPLT-SPLT-GLOCK-17-1
Molding Preparation - Retention Plates - Split Mold - for Glock - 19
These are split-mold retention plates for thermoform holster making. They allow the maker to create retention/clearance for holster molding in a vacuum press. This jig…
- Model
- DM-MP-RETPLT-SPLT-GLOCK-19-1
Molding Preparation - Slide Release Blocking - Universal
This is universal slide release blocking for thermoform holster making. It is 0.125 inch in thickness and allows the maker to create slide release clearance for holster molding.…
- Model
- DM-MP-SLDBLK-UNI-1
Molding Preparation - Slide Spacer - Universal
This is a universal slide spacer for thermoform holster making. It is 0.1 inch in thickness and allows the maker to prepare the slide area of…
- Model
- DM-MP-SLDSPC-UNI-1
Molding Preparation - Trigger Spacer - Fits Glock - (.125)
This is a trigger spacer for Glock firearms. It is 1/8 inch in thickness and allows the maker to prepare the…
- Model
- DM-MP-TRGSPC-GLK-125-1
Molding Preparation - Wallet Jig - (.250)
This is a wallet jig. It is 1/4 inch in thickness and allows the maker to create a perfect mold form for…
- Model
- DM-MP-WALLET-250-1
Molding Preparation - Wallet Jig - (.375)
This is a wallet jig. It is 3/8 inch in thickness and allows the maker to create a perfect mold form for…
- Model
- DM-MP-WALLET-375-1
Molding Preparation - Wallet Jig - (.500)
This is a wallet jig. It is 1/2 inch in thickness and allows the maker to create a perfect mold form for…
- Model
- DM-MP-WALLET-500-1
Mounting/Drilling Template - (.875 Dual Adjustable) - (fits Flush Mount/FOMI Clips)
This is an attachment mounting template with a 7/8 inch dual-adjustable height/cant ability. It is designed to help create…
- Model
- DM-MT-FLUSH-875-DUALHC-1
Mounting/Drilling Template - (.875/15° Adjustable) - (fits Flush Mount/FOMI Clips)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help…
- Model
- DM-MT-FLUSH-875-15-1
Mounting/Drilling Template - (.875/15° Adjustable) - (fits Flush Mount/FOMI Clips) - (Thin)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help…
- Model
- DM-MT-FLUSH-875-15-T-1
Mounting/Drilling Template - (.875/20° Adjustable) - (fits Flush Mount/FOMI Clips)
This is an attachment mounting template with an adjustable 20° cant ability. It is designed to help…
- Model
- DM-MT-FLUSH-875-20-1
Mounting/Drilling Template - (.875/20° Adjustable) - (fits Flush Mount/FOMI Clips) - (Thin)
This is an attachment mounting template with an adjustable 20° cant ability. It is designed to help…
- Model
- DM-MT-FLUSH-875-20-T-1
Mounting/Drilling Template - (1.0 Dual Adjustable) - (fits Flush Mount/FOMI Clips)
This is an attachment mounting template with a 1 inch dual-adjustable height/cant ability. It is designed to help…
- Model
- DM-MT-FLUSH-1-DUALHC-1
Mounting/Drilling Template - (1.0/15° Adjustable) - (fits Flush Mount/FOMI Clips)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help…
- Model
- DM-MT-FLUSH-1-15-SLOT-1
Mounting/Drilling Template - (1.0/15° Adjustable) - (fits Flush Mount/FOMI Clips) - (Thin)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help…
- Model
- DM-MT-FLUSH-1-15-SLOT-T-1
Mounting/Drilling Template - (1.0/18° Adjustable) - (fits Flush Mount/FOMI Clips)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help…
- Model
- DM-MT-FLUSH-1-18-1
Mounting/Drilling Template - (1.0/18° Adjustable) - (fits Flush Mount/FOMI Clips) - (Thin)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help…
- Model
- DM-MT-FLUSH-1-18-T-1
Mounting/Drilling Template - (10° Adjustable) - (Blade-Tech™ Short Drop)
This is an attachment mounting template with an adjustable 10° cant ability. It is designed to help…
- Model
- DM-MT-BTSD-10-1
Mounting/Drilling Template - (10° Adjustable) - Speed Ease Jig (for OWB Taco)
This is an attachment mounting template with an adjustable 10° cant ability. It is designed to help…
- Model
- DM-MT-SPDESE-10-1
Mounting/Drilling Template - (15° Adjustable) - (fits Large Tek-Lok, DCI Combat Loop)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help…
- Model
- DM-MT-TL-LG-15-1
Mounting/Drilling Template - (15° Adjustable) - (fits Large Tek-Lok, DCI Combat Loop) - (Thin)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help…
- Model
- DM-MT-TL-LG-15-T-1
Mounting/Drilling Template - (15° Adjustable) - (fits Small Tek-Lok)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help…
- Model
- DM-MT-TL-SM-15-1
Mounting/Drilling Template - (15° Adjustable) - (fits Ulticlip)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help…
- Model
- DM-MT-ULTI-15-1
Mounting/Drilling Template - (15° Adjustable) - (fits Ulticlip) - (Thin)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help…
- Model
- DM-MT-ULTI-15-T-1
Mounting/Drilling Template - (Adjustable) - (fits RCS Overhook/Strut)
This is an adjustable attachment mounting template. It is used to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-RCS-OVRSTRT-1
Mounting/Drilling Template - (Adjustable) - (fits RCS Overhook/Strut) - (Thin)
This is an adjustable attachment mounting template. It is used to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-RCS-OVRSTRT-T-1
Mounting/Drilling Template - (fits Blade-Tech Duty Drop)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-BT-DD-1
Mounting/Drilling Template - (fits Blade-Tech WRS Hood)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-BT-WRS-1
Mounting/Drilling Template - (fits Blade-Tech WRS Hood) - (Thin)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-BT-WRS-T-1
Mounting/Drilling Template - (fits Bravo Concealment & RCS Pancake Loops)
This is an adjustable attachment mounting template. It is used to help create the hole mounting/drilling…
- Model
- DM-MT-RCS-PANLOOP-1
Mounting/Drilling Template - (fits G-Code RTI 33/34 Hanger RH/LH)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-RTI3334-1
Mounting/Drilling Template - (fits G-Code RTI GCA 35)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-RTI-GCA35-1
Mounting/Drilling Template - (fits Safariland ELS)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-SAFLND-ELS-1
Mounting/Drilling Template - (fits Safariland Paddle) - UBL Drop Jig
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-SAFLND-UBL-1
Mounting/Drilling Template - (fits Safariland SLS Hood)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-SAFLND-SLSHOOD-1
Mounting/Drilling Template - (fits Safariland SLS Hood) - (Thin)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-SAFLND-SLSHOOD-T-1
Mounting/Drilling Template - (Non-Adjust) - (fits Large Tek-Lok)
This is a fixed attachment mounting template. It is designed to help create the hole mounting/drilling pattern…
- Model
- DM-MT-TL-LG-NA-1
Mounting/Drilling Template - (Non-Adjust) - (fits Large Tek-Lok) - (Thin)
This is a fixed attachment mounting template. It is designed to help create the hole mounting/drilling pattern…
- Model
- DM-MT-TL-LG-NA-T-1
Mounting/Drilling Template - (Non-Adjust) - (fits Small Tek-Lok)
This is a fixed attachment mounting template. It is designed to help create the hole mounting/drilling pattern…
- Model
- DM-MT-TL-SM-NA-1
Mounting/Drilling Template - Combo Jig
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-COMBO-1
Mounting/Drilling Template - Combo Jig - (Thin)
This is a fixed attachment mounting template. It is designed to help create the hole…
- Model
- DM-MT-COMBO-T-1
Mounting/Drilling Template - Straight - (.875) - (fits Flush Mount/FOMI Clips)
This is a straight pattern attachment mounting template. It is designed to help create the hole mounting/drilling pattern…
- Model
- DM-MT-FLUSH-875-STR-1
Mounting/Drilling Template - Straight - (.875) - (fits Flush Mount/FOMI Clips) - (Thin)
This is a straight pattern attachment mounting template. It is designed to help create the hole mounting/drilling pattern…
- Model
- DM-MT-FLUSH-875-STR-T-1
Mounting/Drilling Template - Straight - (1.0) - (fits Flush Mount/FOMI Clips)
This is a straight pattern attachment mounting template. It is designed to help create the hole mounting/drilling pattern…
- Model
- DM-MT-FLUSH-1-STR-1
Mounting/Drilling Template - Straight - (1.0) - (fits Flush Mount/FOMI Clips) - (Thin)
This is a straight pattern attachment mounting template. It is designed to help create the hole mounting/drilling pattern…
- Model
- DM-MT-FLUSH-1-STR-T-1
Mounting/Drilling Template - Straight - (fits FabriClip)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-FABRICLP-1
Mounting/Drilling Template - Straight - (fits Molle-Lok®/Malice Clip)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-BT-MOLLE-1
Mounting/Drilling Template - Straight - (fits RCS Overhook/Strut)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-RCSSTRUT-1
Mounting/Drilling Template - Straight - (fits RCS Overhook/Strut) - (Thin)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-RCSSTRUT-T-1
Mounting/Drilling Template - Straight - 6 Hole (1/4 Hole Diameter) - (.75 Hole Spacing)
This is a 6-hole straight pattern attachment mounting template. It is designed to help create the hole mounting/drilling…
- Model
- DM-MT-75-STR-6-250-1
Mounting/Drilling Template - Straight - 6 Hole (1/4 Hole Diameter) - (1in. Hole Spacing)
This is a 6-hole straight pattern drilling template for KYDEX® sheaths. It is…
- Model
- DM-MT-1-STR-6-250-1
Mounting/Drilling Template - Straight - 6 Hole (3/16 Hole Diameter) - (.75)
This is a 6-hole straight pattern attachment mounting template. It is designed to help create the hole mounting/drilling…
- Model
- DM-MT-75-STR-6-1
Photo Gallery #1 
|
