DIY Video Lesson
Sheath/Holster Making
Making a 2-piece "Sandwich-Style" Holster - Basic Design & Construction

In this video, Robbie Feltman from CKK Industries will show you the basics of 2-piece (sandwich-style) thermoform holster design and construction. You will learn staging, handgun and material preparation, heating, forming, finishing and assembly. This presentation also includes belt loop placement and mounting. The demonstrated holster design in this video is done in Coyote Brown cell/smooth KYDEX® thermoform sheet and includes black roll-eyelets and mounting hardware. This is a recommended video for beginning to intermediate hobbyist.

Specifications
Instructor = Robbie Feltman
Video Format = HD (High Definition)
Video Run Time = 23:51


Check below for all the materials and tools that we used in this video to customize your own 2-piece video.
Result Pages:
*CKK Sheath/Holster Molding Press - Bench Model - (8 x 12)

The CKK sheath/holster molding press is the industry standard in thermoplastic forming presses. Built…

Model
KKSMP-12
8-32 - PHILLIPS - Flat Head - (.375 x .225) Head #5 for IWBs - (1ea)

These are black oxide coated steel flat head screws with Phillips drive. They have a smaller diameter head…

Model
832FHP-IWB-5-BK-375-1
CKK Eyelet Flaring Die Guide - Journeyman Series - For Eyelet & Snap Setters

This is the stainless steel die guide designed to align and hold our Journeyman Series Eyelet…

Model
KYRDJS-DG
CKK Eyelet Flaring Dies - Journeyman Series - #8 - (1/4)

Our #8 Journeyman Series Rivet/Eyelet flaring die set is designed to "roll" the unflared side of a…

Model
KYRDJS-8
CKK Eyelet Flaring Dies - Master Series - #8 - (1/4)

Our #8 Master Series Kydex Rivet/Eyelet flaring die is designed to professionally "roll" the non-flared…

Model
KYRD-88
CKK Eyelet Flaring Press - Master Series - (For Knife Sheath & Gun Holster Making)

Own the Original!
Get the flaring performance that you expect! The CKK Master Series…

Model
KYRD-PRS
Eyelet Hand Setter (#8 size) - (Fits 1/4 Inch Diameter Eyelets) - (Includes Base & Ram)

This is the #8 eyelet hand setter tool. It is designed to create a "rolled" finish on…

Model
HRSK8
Eyelets - #8-8 (1/4) - Black Finish - (for .080 KYDEX®/HOLSTEX®) - 100 Pack

These are the industry standard 1/4 inch diameter flaring eyelet/rivet used in making thermoform sheaths and gun…

Model
KYSR8-100
Finishing Washers - #8 - Countersunk - (Black Oxide)

These are finishing washers that are designed to work with tapered…

Model
AV-FW-08-BLK-1
HolsterMolds™ - Holster Molding Prop - for S&W 9/40 SHIELD

Professional holster makers know that the safest, cleanest, and least damaging way to create a holster for a…

Model
HM-MP9SHIELD-1
Infrared Thermometer - Digital Laser - Pro Line - (Thermoform Molding)

The key to professional thermoforming results is proper temperature control. With our professional line infrared digital thermometer gun,…

Model
ITG-PL1
KYDEX Eyelet Drill - (#8) - (For 1/4 Inch Eyelets) - CKK Design

Used by professional knife sheath and gun holster makers, these specially designed #8 sized patented…

Model
KYDRL8
KYDEX® Sheet  - Black - (.080) - (1ft x 1ft)

This holster and sheath making material is cell/smooth finish .080 gauge KYDEX®. It is thermoform sheeting in…

Model
KYSHE08
KYDEX® Sheet - Blizzard White - (.080) - (1ft x 1ft)

This holster and sheath making material is cell/smooth finish .080 gauge KYDEX®. It…

Model
AV-KYSHE-BLIZ-08
KYDEX® Sheet - Blood Red - (.080) - (1ft x 1ft)

This holster and sheath making material is cell/smooth finish .080 gauge KYDEX®. It is thermoform sheeting…

Model
KYSHBR08
KYDEX® Sheet - Flat Dark Earth - Fall - (.080) - (1ft x 1ft)

This holster and sheath making material is cell/smooth finish .080 gauge KYDEX®. It is thermoform…

Model
AV-KYSHE-FDEF-08
KYDEX® Sheet - Flat Dark Earth - Spring - (.080) - (1ft x 1ft)

This holster and sheath making material is cell/smooth finish .080 gauge KYDEX®. It is thermoform…

Model
AV-KYSHE-FDES-08
KYDEX® Sheet - Olive Drab - (.080) - (1ft x 1ft)

This holster and sheath making material is cell/smooth finish .080 gauge KYDEX®. It is thermoform sheeting in…

Model
KYSHOD08
Sander/Grinder - 1 x 42 - Kalamazoo (1SM)

The Kalamazoo 1-SM 1 x 42 inch grinder is the perfect choice for pro level kit…

Model
SMKG
Slotted Post - Stainless Steel - Black Zinc Coated - (1/4 in) - 10 Pack

These are black zinc coated stainless steel slotted posts. They are used for mounting sheath and holster attachments. Because they…

Model
AV-SP-250-SSBK-10
Thermoform Item Masking Tape - 3M Brand - (2in x 60yd)

This is 3M brand thermoform item masking tape. When creating a sheath or holster,…

Model
TIM23902M3
Result Pages:
Manufacturers
Quick Find

 Photo Gallery #1
 Photo Gallery #2
 --------------
 Knife Terminology
 General Knife Safety
 Basic Knife History
 Kit Instructions
 Knowledge Base

Sales/Support
+1.877.255.6433

Price Match Guarantee...click for details
Customer Login

Log in to your Account

 

Join the KnifeKits.com news! Click here...