DIY Video Lesson
Sheath/Holster Making
DIY Video - How to Make an Adjustable Retention Holster for the Glock 19 w/ a RCS Overhook Strut Attachment


In this video, Holstersmith.com shows how to make a holster for the Glock 19 handgun. The 1-piece holster in this demonstration video was made with a Black Raptor HOLSTEX® thermoform sheet and a RCS Overhook Strut attachment. The video covers the complete holster build from molding to final sanding and polishing. The RCS Overhook Strut allows for the holster to be carried inside-the-waistband and makes a great weekend project.

Specifications
Builder = Robbie Feltman
Instructor = Steve Andrews
Video Format = HD (High Definition)
Video Run Time = 14:54


Check below for all the materials and tools that we used in this video to customize your own IWB holster.
Result Pages:
*CKK Sheath/Holster Molding Press - Bench Model - (8 x 12)

The CKK sheath/holster molding press is the industry standard in thermoplastic forming presses. Built…

Model
KKSMP-12
8-32 - PHILLIPS - Oval Head - (.500 x .300) - (1ea)

These are black oxide coated steel oval head screws with Phillips drive. These are commonly used for TLMAB…

Model
AV-832OHP-BK-500-1
8-32 - PHILLIPS - Truss Head - (.375 x .375) - (1ea)

These are black oxide coated steel truss head screws with Phillips drive. These are commonly used for…

Model
AV-832THP-BK-375-1
Abrasive Wheel - Flap Wheel - 800 Grit - (4 x 1.187)

These are non-woven abrasive flap wheels. They are especially capable for polishing the…

Model
AW-FW-800-1
CKK Eyelet Flaring Die Guide - Journeyman Series - For Eyelet & Snap Setters

This is the stainless steel die guide designed to align and hold our Journeyman Series Eyelet…

Model
KYRDJS-DG
CKK Eyelet Flaring Dies - Journeyman Series - #8 - (1/4)

Our #8 Journeyman Series Rivet/Eyelet flaring die set is designed to "roll" the unflared side of a…

Model
KYRDJS-8
CKK Eyelet Flaring Dies - Master Series - #8 - (1/4)

Our #8 Master Series Kydex Rivet/Eyelet flaring die is designed to professionally "roll" the non-flared…

Model
KYRD-88
CKK Eyelet Flaring Press - Master Series - (For Knife Sheath & Gun Holster Making)

Own the Original!
Get the flaring performance that you expect! The CKK Master Series…

Model
KYRD-PRS
Eyelet Hand Setter (#8 size) - (Fits 1/4 Inch Diameter Eyelets) - (Includes Base & Ram)

This is the #8 eyelet hand setter tool. It is designed to create a "rolled" finish on…

Model
HRSK8
Finishing Washers - #8 - Countersunk - (Black Oxide)

These are finishing washers that are designed to work with tapered…

Model
AV-FW-08-BLK-1
Holster Attachment & Retention Washer - Black EPDM - (.500 x .180 x .375) - (1ea)

These are black EPDM rubber silencing washers that are commonly used with TLMAB mounting posts, chicago screws,…

Model
W-EPDM-500180375-1
HolsterMolds™ - Holster Molding Prop - for Glock 19/23/32

Professional holster makers know that the safest, cleanest, and least damaging way to create a holster for a…

Model
HM-GLOCK19-1
SOLD OUT
HOLSTEX™ - DIY Thermoform Sheet  - Carbon Fiber/Tactical - (Armor Black) - (.080) - (1ft x 1ft)

HOLSTEX™ is a breakthrough in DIY thermoform sheet material. It is designed exclusively for small to medium…

Model
HLX-SHE08-CFTAC-BLK
HOLSTEX™ - DIY Thermoform Sheet  - Carbon Fiber/Tactical - (Killer Coyote) - (.080) - (1ft x 1ft)

HOLSTEX™ is a breakthrough in DIY thermoform sheet material. It is designed exclusively for small to medium…

Model
HLX-SHE08-CFTAC-KILCOY
HOLSTEX™ - DIY Thermoform Sheet  - Raptor/Tactical - (Armor Black) - (.080) - (1ft x 1ft)

HOLSTEX™ is a breakthrough in DIY thermoform sheet material. It is designed exclusively for small to medium…

Model
HLX-SHE08-RAPTOR-BLK
HOLSTEX™ - DIY Thermoform Sheet  - Raptor/Tactical - (Brown) - (.080) - (1ft x 1ft)

HOLSTEX™ is a breakthrough in DIY thermoform sheet material. It is designed exclusively for small to medium…

Model
HLX-SHE08-RAPTOR-BRWN
HOLSTEX™ - DIY Thermoform Sheet  - Raptor/Tactical - (London Tan) - (.080) - (1ft x 1ft)

HOLSTEX™ is a breakthrough in DIY thermoform sheet material. It is designed exclusively for small to medium…

Model
HLX-SHE08-RAPTOR-LT
Infrared Thermometer - Digital Laser - Pro Line - (Thermoform Molding)

The key to professional thermoforming results is proper temperature control. With our professional line infrared digital thermometer gun,…

Model
ITG-PL1
KYDEX Eyelet Drill - (#8) - (For 1/4 Inch Eyelets) - CKK Design

Used by professional knife sheath and gun holster makers, these specially designed #8 sized patented…

Model
KYDRL8
Molding Preparation - Retention Plate - for Glock 19

This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows…

Model
DM-MP-RETPLT-GLOCK-19-1
Mounting/Drilling Template - Straight - (fits RCS Overhook/Strut)

This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…

Model
DM-MT-RCSSTRUT-1
Sander/Grinder - 1 x 42 - Kalamazoo (1SM)

The Kalamazoo 1-SM 1 x 42 inch grinder is the perfect choice for pro level kit…

Model
SMKG
Slotted Post - Stainless Steel - Black Zinc Coated - (1/4 in) - 10 Pack

These are black zinc coated stainless steel slotted posts. They are used for mounting sheath and holster attachments. Because they…

Model
AV-SP-250-SSBK-10
Slotted Post - Stainless Steel - Black Zinc Coated - (1/8 in) - 10 Pack

These are black zinc coated stainless steel slotted posts. They are used for mounting sheath and holster attachments. Because they…

Model
AV-SP-125-SSBK-10
Thermoform Item Masking Tape - 3M Brand - (2in x 60yd)

This is 3M brand thermoform item masking tape. When creating a sheath or holster,…

Model
TIM23902M3
Result Pages:
Manufacturers
Quick Find

 Photo Gallery #1
 Photo Gallery #2
 --------------
 Knife Terminology
 General Knife Safety
 Basic Knife History
 Kit Instructions
 Knowledge Base

Sales/Support
+1.877.255.6433

Price Match Guarantee...click for details
    0 items
Customer Login

Log in to your Account

 

Join the KnifeKits.com news! Click here...