This knife handle bushing is used to reduce the through-hole diameter on a knife handle tang. This tang hole reduction will allow a smaller diameter pin or fastener diameter to pass through cleanly, but will virtually eliminate side-to-side movement. Using a bushing reducer like this will provide you with far more artistic control over your final handle fastener diameter and will ensure that the resulting mechanical handle construction is safe and tight. These can also be used with handle epoxies to permanently affix the handle.
In addition to use as a through-hole reducer, these knife handle bushings are very popular as folding knife standoffs (spacers), and can be used in many other applications, such as lanyard findings.
Displaying 1 to 13 (of 13 products)
This knife handle bushing is used to reduce the through-hole diameter on a knife handle tang. Using this model…
- Model
- BUSHING5
This knife handle bushing is used to reduce the through-hole diameter on a knife handle tang. Using this model…
- Model
- BUSHING10
This knife handle bushing is used to reduce the through-hole diameter on a knife handle tang. Using this model…
- Model
- BUSHING4
This knife handle bushing is used to reduce the through-hole diameter on a knife handle tang. Using this model…
- Model
- BUSHING9
This knife handle bushing is used to reduce the through-hole diameter on a knife handle tang. Using this model…
- Model
- BUSHING3
This knife handle bushing is used to reduce the through-hole diameter on a knife handle tang. Using this model…
- Model
- BUSHING8
This knife handle bushing is used to reduce the through-hole diameter on a knife handle tang. Using this model…
- Model
- BUSHING2
This knife handle bushing is used to reduce the through-hole diameter on a knife handle tang. Using this model…
- Model
- BUSHING7
This knife handle bushing is used to reduce the through-hole diameter on a knife handle tang. Using this model…
- Model
- BUSHING1
This knife handle bushing is used to reduce the through-hole diameter on a knife handle tang. Using this model…
- Model
- BUSHING6
These are .265" diameter stainless steel knife pivot bushings with a .156" pass-through hole. They are .160" in length. Heat…
- Model
- BSHSS-265140160
These are .310" diameter brass knife pivot bushings with a .187" (3/16") pass-through hole. They are .187" in length. Brass…
- Model
- BSHB-310187187
These are .310" diameter brass knife pivot bushings with a .187" (3/16") pass-through hole. They are .217" in length. Brass…
- Model
- BSHB-310187217
Displaying 1 to 13 (of 13 products)