For metal hole making, our coil spring cutters provide fast, accurate, burr-free holes in steel materials. These are annular cutting tools that cut around the edge of the hole and eject the center as a slug. Because they're hollow, there's no dead zone as with twist drills. Unlike hole saws, that rip and tear through the material, they quickly give you a quality, virtually burr-free hole. Our coil spring pocket cutters are available in 3 sizes. Spring loaded replaceable arbor pilot "pops" the slug from the cutter. These cutter bits are very nice. Click the thumbnails below for more details about the coil spring pocket cutter bits:
Displaying 1 to 8 (of 8 products)
These are used for cutting the cavity needed for a coil spring pocket.
For metal…
- Model
- B13204
These are used for cutting the cavity needed for a coil spring pocket on a folding…
- Model
- B13206
These are used for cutting the coil spring cavity needed for a folding knife.
For metal…
- Model
- B13208
This is a .4375 (7/16) inch pocket cutter bit that is used for cutting the coil spring cavity…
- Model
- B111123
This is a .50 (1/2) inch pocket cutter bit that is used for cutting the coil spring cavity…
- Model
- B111163
This is the heavy duty version of our spring-loaded pocket cutter guide. When combined with a cutting…
- Model
- B111222
These are used for cutting the coil spring cavity needed for a folding knife.
For…
- Model
- B13216
These are replacement pilots for arbor #B13216
These are sold in (3)-Packs…
- Model
- B13217
Displaying 1 to 8 (of 8 products)