|
|
   |
|
3/16
Press Fit Button Head Pivot (1/4 UFO
Head) 1)
This pivot design will press into your side plate of
the knife bolster, liner or frame.
The press fit will stop the pivot
from spinning when you tighten
it up with the screw from the opposite side. Because it is press
fit, it will stop the pivot from loosening after the pivot
is tightened.
2)
The UFO head design is the same diameter and height
as
our 6-23 button head screw. Having both
heads with the same size will
let you simplify
the counter bore that you use with the
knife. One set up is all you need to do both
sides. This saves time and effort for you,
and
concludes a clean look from side to side.
This version has our trademark designer "UFO" head
design style on the stationary head to give your project that
"cool, modern look" that everyone is after. Our press fit serrated spine pivot is perfect for folders, folding tools and Butterfly knives (balisongs). The .1863"-.1873" through-diameter on this pivot is just undersized enough to slip-fit through a .187"-.1875" reamed hole. Our press fit pivot system is one of the very best designs on the market. We
suggest using a .1865 - .187 diameter reamer. This
is only a suggestion! Specifications: 1 unit = (1) 316PFBHPS-D + (1) 632BHT screw
|
|
Select Items Below
|
